Services

Consultancy Services

Consultancy Services

These services include the following activities:

  1. Checking out the nature of the project as per owner requirements.

  2. Preparation of project philosophy and conceptual design.

  3. Building up of project specifications for different disciplines according to the international codes and standards in addition to client requirements.

  4. Building up of project Bill of Quantities.

  5. Assign the project general and special conditions and criteria of eligible bidders.

  6. Preparation of complete tender book.

  7. Leading of the process of tendering stage with the bidders including the pre-bid and post-bid clarifications periods.

  8. Technical and commercial evaluation for bidder’s proposals.

  9. Preparation of final evaluation report.

  10. Design review and approvals of materials during project stage.

  11. Approval of project as built drawings.

The above services can be implemented in different types of projects as follows:

  1. Infrastructure projects such as:

    1. New cities.

    2. Compounds.

    3. Urban areas.

  2. Special Building projects such as:

    1. Residential buildings.

    2. Commercial buildings.

    3. Hotels.

    4. Hospitals.

    5. Banks.

    6. Malls.

    7. Schools.

  3. Power projects such as:

    1. High Voltage Substations projects up to 380kV, 400kV and 500kV levels:

      • Outdoor and Indoor substations.

      • AIS and GIS substations.

    2. Transmission Lines projects up to 380kV, 400kV and 500kV levels:

      • Over Head Transmission Lines.

      • Under Ground Cables.

    3. Small size Power plants (up to 100MVA).

Detailed Engineering Services

These services include the following activities:

  1. Double check of complete project specifications and assign the possible contradictions between different parties of tender documents.

  2. Preparation of design input request form.

  3. Preparation of base design submittals taking into consideration the necessary coordination between all design disciplines.

  4. Sizing calculations for different project equipment.

  5. Preparation of Detailed design submittals.

  6. Preparation of Work shop drawings, if required.

  7. Preparation of as Built drawings.

The above services can be implemented in different types of projects as follows:

  1. Infrastructure projects such as:

    1. New cities.

    2. Compounds.

    3. Urban areas.

  2. Special Building projects such as:

    1. Residential buildings.

    2. Commercial buildings.

    3. Hotels.

    4. Hospitals.

    5. Banks.

    6. Malls.

    7. Schools.

  3. Power projects such as:

    1. High Voltage Substations projects up to 380kV, 400kV and 500kV levels:

      • Outdoor and Indoor substations.

      • AIS and GIS substations.

    2. Transmission Lines projects up to 380kV, 400kV and 500kV levels:

      • Over Head Transmission Lines.

      • Under Ground Cables.

    3. Small size Power plants (up to 100MVA).
 

Site supervision Services

These services include the following activities:

  1. Preparation of site activity time plan as per overall project time schedule.

  2. Following up, on weekly basis, with all site staff including subcontractors in order to assure availability of all necessary equipment and materials for the planned activities during the week after.

  3. Coordination with all site staff including all disciplines in order to prevent contradiction between different activates.

  4. Following up execution of each activity within the scheduled time frame.

  5. Preparation the required periodical site activities reports higher management analysis.

  6. Taking the necessary corrective action to compensate for any delay in any of site activities.

  7. Approvals of subcontractor’s progress sheet based upon the actual site activities progress.

Value Engineering

These objective of this service is to get optimized design according to the international standards with the less possible minimum cost. It can be summarized as follows:

  1. Review of the project specifications and requirements.

  2. Review of the project design according to the specifications and international standards.

  3. Checking out the different sizing calculations and software models of the projects in order to discover the points of design optimization.

  4. Preparation of the necessary design optimization.

  5. Recalculation of project cost based on the new optimized design.

Project Management and planning Services

These services include the following activities:

  1. Preparation of project time schedule.

  2. Assign the project budget in coordination with the project owner.

  3. Selection of subcontractors and suppliers based on clear and professional technical and commercial prequalification process.

  4. Following up execution of each activity within the scheduled time frame.

  5. Preparation the required periodical reports for project progress analysis.

  6. Taking the necessary corrective action to compensate for any delay in any of the projects activities.

  7. Approvals of subcontractors and suppliers progress invoices based upon the actual material delivery and project progress.

Network studies

These services include the following activities:

  1. Load flow study.

  2. Short circuit study.

  3. Protection settings and coordination study.

  4. Insulation coordination study.

Copyright © 2018 Bahrawy Consultancy Group. All rights reserved